Fenix E18R V2.0 compact rechargeable LED torch updates the popular original with an increase from 750 to a stunning 1200 lumen maximum output. Big torch burst output from a tiny frame! Small, mighty and versatile with its choice of massive output or impressive 200 hour emergency run time, this little Fenix LED torch is ideal for every day carry, emergency preparedness and more.
The light is rechargeable via a rubber covered USB-C socket and driven by a high current Fenix 16340 battery (removable and easily replaced with a spare).
Multiple brightness levels offer a great choice of extreme power for short bursts, mid power for general use and ultra low power for huge run time.
* Single switch for on / off / output selection
* Intelligent memory, recalls your last used brightness level
* 6000K beam colour temperature
* LED battery level / charge indicator built into switch
* 80 minute charge time
* 60C electronic over temperature protection
* Dual lock-out to prevent accidental activation (electronic and clip cover)
* Magnetic tail cap for convenient use
* Tail stands for use as a candle
* Versatile 2 way pocket clip
* 2m waterproof for 4 hours
* 1.5m drop tested
* HA111 hard anodized
* Weighs only 56 grams inc battery
For full product details, please refer to the user manual in the images area.
Specification
LED Type
LUMINUS SST40 LED
Model
E18R V2.0
Battery Type
16340
Battery Quantity
1
Additional Battery Type
1 x CR123 (Do NOT attempt to charge non-rechargeable CR123 batteries in this product)
Premium Type III hard-anodized anti-abrasive finish
Tail Stand
Yes
Pocket Clip
Yes
Waterproofing
IP68, 2m depth & dustproof
Dimensions/Weight
67mm (Length) x 22mm (Head Diameter) x 22mm (Body Diameter)
56 grams (incl battery)
Further Info
N/A
Operation
Fenix E18R V2.0 Operation:
On/Off:
Press and hold the side switch for 0.5 seconds to turn on/off the light.
Output Selection:
With the light switched on, single click the side switch to cycle through Moonlight→Turbo→Low→Med→High→Turbo.
Strobe:
Press and hold the side switch for 1.2 seconds to enter Strobe, single click the side switch again to turn back to the previously used mode.
Intelligent Memory Circuit:
The light memorises the last selected output excluding Turbo and strobe. When turned on again the previously used output will be recalled. The High mode will be activated when turned on again if the light is turned off on Turbo mode.
Lock/Unlock:
With the light switched off, double click the side switch the light flashes twice and enters lockout mode, double click the side switch again to unlock the light.
* 16340 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.
Battery Replacement:
Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tail back on.
Charging:
First switch off the light and plug the USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the light. The indicator will display red while charging, and will turn green when fully charged. Once charging is completed, be sure to close the anti-dust cover to maintain the dustproof and waterproof ability.
Note:
The normal charging time of the included Fenix ARB-L16-700P rechargeable Li-ion battery is approximately 1 hour and 20 minutes from depletion to full charging. Recharge a stored light every four months to maintain optimum performance of the battery.
Battery Level Indication:
Each time the light is turned on, the indicator will indicate the battery level and will last for 3 seconds. Green light on: saturated 100% - 85% Green light flashes: sufficient 85% - 50% Red light on: poor 50% - 25% Red light flashes: critical 25% - 1%
Note: This only works with Fenix ARB-L16-700P 16340 rechargeable Li-ion battery.
Intelligent Overheat Protection:
The light will accumulate a lot of heat when used on relatively high modes for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of high modes.
Low-voltage Warning:
When the voltage level drops below the pre-set level, the flashlight is programmed to downshift to a lower brightness level until Moonlight mode is reached. When this happens in Moonlight mode, the light constantly blinks red to remind you to recharge or replace the battery.
Note: This only works with Fenix ARB-L16-700P 16340 rechargeable Li-ion battery.
Usage and Maintenance:
Disassembling the sealed head can cause damage to the light and will void the warranty. Fenix recommends using an excellent quality battery. If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion. Lock the light or remove the battery to prevent accidental activation during storage or transportation. Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare． Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
Problems:
A: The battery needs recharging or replacing. Solution: Replace/recharge the battery (Ensure the battery is inserted according to the manufacturer’s specifications). B: The threads, PCB board contact or other contacts are dirty. Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
