Fenix LD02 torch, the V2.0 model features beautiful build quality and added features in a compact package that's easy to carry everywhere. The Stainless Steel tail cap and head bring a touch of class to this stunning product whilst a secondary 365nm UV LED brings extra functionality.
The main Cree XQE-HI LED has a temperature of 3000K for outstanding colour rendition and provides 3 brightness levels of 1, 25 and 70 lumen, cycled via the Stainless Steel tail switch. Cycling past the 70 lumen output switches to the 200mw UV setting which is ideal for checking bank notes etc. The torch features a memory function that remembers the last setting when switching on, so no having to cycle through each time for your preferred setting.
Power is provided by a single AAA battery which is inexpensive and convenient to replace.
* Cree XQ-E HI LED (90-CRI/ 3000K), with lifespan of 50,000 hour
* Fitted with 365nm UV LED
* Powered by one AAA battery
* Digitally regulated output maintains constant brightness
* Reverse polarity protection to protect from improper battery insertion
* Tail switch for one-handed activation and output selection
* Aluminium body with hard-anodized premium coating
* Optimal quality optical lens
* Waterproof to 2 metres depth
* 5 year Fenix warranty
Unscrew the light head and insert the battery with the anode side (+) towards the light head, then screw the light head back on.
Intelligent Memory Circuit:
The light will memorise the last selected brightness level. When turned on again the previously used brightness level will be recalled.
Time-limited downshift:
The light will accumulate a lot of heat when used on high output level for extended periods. When the light has been used on high for 1.5 minuets, the light will automatically step down by a few lumens until 50 lumens is reached to reduce the temperature. High mode can be reselected.
Usage and Maintenance:
Disassembling the sealed head can cause damage to the light and will void the warranty. Fenix recommends using an excellent quality battery. If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion. Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare． Periodic cleaning of the battery contacts improves the light's performance as dirty contacts may cause the light to flicker, shine intermittently or even fail to illuminate for the following reasons:
Problems:
A: The battery needs replacing. Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s specifications). B: The threads, PCB board contact or other contacts are dirty. Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
