HM70R is an ultra-rugged, all in one aluminium head torch, recommended for caving, tough work situations and rugged outdoor use. The light is powered by a large capacity Fenix 21700 rechargeable battery (included).
HM70R is waterproof to 2 metres for an impressive 4 hours. The replaceable battery, LED's and electronics are contained within a precision machined heatsink unibody housing, creating ultimate durability for the toughest working and outdoor environments. Harsh working conditions, caving, rescue, sea fishing and more - HM70R can handle it whilst giving you impressive light output and run time!!
A modern USB-C type socket is fitted under an aluminium screw cover (charging cable supplied) to charge the included 21700 battery in just 4 hours using your 2A mobile phone charger or similar.
Main beam: (6000K colour temperature):
The main 1600 lumen LED and reflector provide a balanced combination of spot and wide area spill light, lighting near and far at the same time. Safe illumination for a multitude of tasks. The main light offers output levels from 30 to 1600 lumens and punches out to an impressive 186 meters at maximum output.
Low - 30 lumens (100 hours) - 26m beam
Med - 150 lumens (30 hours) - 53m beam
High - 500 lumens (6 hours) - 105m beam
Turbo - 1600 lumens (2 hours total) - 186m beam (over heat protected - output will reduce to protect the LED and circuitry at 65c. Max power can be re set once the headlamp cools)
Pure flood beam with no distracting hard edges:
The HM70R V2's pure flood beam offers 2 output levels of 70 and 400 lumens. From a low level close working beam to a smooth, powerful pure flood with no hot spot, the flood light has you covered. Run times vary from a powerful 8 hours working light, to an impressive 2 days at 70 lumens!
Med - 70 lumens (48 hours) - 16m beam
High - 400 lumens (8 hours) - 38m beam
Red beam:
Protect your night vision or set up an emergency signal with the low level red beam.
Red - 5 lumens (400 hours) - 5m beam
Red SOS - 5 lumens (800 hours - 33 days !) - 5m beam
*** Please note that beams cannot be operated together ***
Fenix HM70R headlamp other features:
• Digitally regulated - maintains constant output
• Mode memory - remembers last used lighting level
• LED battery level / charging indicator behind silicon button cover
• Can use an 18650 battery (ALF-18 battery adapter sold separately)
• Inner waterproof charging socket
• Perforated, breathable comfort headband
• Reflective strips on headband for added visibility
• 2m impact tested for durability
• 180 degree tilt mechanism for ideal beam alignment
• Beam lock out to prevent accidental activation during transport
• IP68 water proof (2m for 4 hours) for the toughest conditions
• Wide operating temperature of -35 to + 45 Deg C
• Fits Fenix ALG-03 V2.0 & ALG-04 helmet mounts for hard hats and caving helmets
The Fenix HM70R tough LED headlamp is perfect for your most arduous pursuits from best caving headlamp, hunting headlamp, search and rescue, tough work and much more. This headlamp offers all the hallmarks of premium Fenix build quality with no corners cut, including metal heat dissipating head (much more expensive to produce than plastic headlamp bodies) and best electronics and LED's available.
Our number one caving headlamp due to its ruggedness and overall performance. Also check out HM65R and HM60R Camo for caving.
For full product details please refer to the user manual in the small images area above.
Specification
LED Type
Luminus SST40, Cree XP-G2 Neutral White and Everlight 2835 red light LEDs.
Functional Mode: High Flood: 400 Lumens, (8hrs), Med Flood: 70 Lumens, (48hrs), Red: 5 Lumens, (400hrs), Red Flash: 5 Lumens (800hrs)
Flashing Modes
Red Flash
Max Beam Distance
186m
Reflector
Smooth aluminium reflector
Lens Type
Toughened Ultra - Clear glass lens with anti - reflective coating
Switch Type
Side on-off-mode switch
Construction
A6061-T6 aircraft grade aluminum
Finish
Premium Type III hard-anodized anti-abrasive finish
Tail Stand
No
Pocket Clip
No
Waterproofing
IP68, 2m depth & dustproof
Dimensions/Weight
94.5mm (Length) x 51mm (Width) x 46mm (Height)
206grams (incl battery & headband)
Further Info
N/A
Operation
Fenix HM70R Operation:
On/Off:
Press and hold the switch for 0.5 seconds to turn on/off the lamp.
Mode Switching:
With the lamp switched off, single click the switch for 0.5 seconds to enter General mode, and double click the switch to enter Functional mode. Press and hold the switch for 1.2 seconds to enter the other mode.
Output Selection:
In General mode, single click the switch to cycle through Low→Med→High→Turbo. In Functional mode, single click the switch to cycle through Red→Med→High→SOS.
Lock/Unlock:
Lock: when the lamp is switched off, press and hold the switch for 3 seconds, the lamp will blink red 3times to indicate locked status. Unlock: when the lamp is locked, press and hold the switch for 3 seconds, the lamp will be activated with 3 one-second red blinks and activated on Red Light mode. In locked status, clicking the switch will activate 3 one-second red blinks to indicate locked status.
Intelligent Memory Circuit:
The headlamp memorises the last selected output on Spotlight mode, when turned on again the previously used output on Spotlight mode will be recalled. If the headlamp is turned off on Turbo level of Spotlight mode, when turned on again, it will be activated on High output of Spotlight mode.
Warning: *21700 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.
Battery Replacement:
Unscrew the cap to insert the battery in accordance with the polarity marks, then screw the cap back on.
Charging:
Indication: The indicator on the battery case will display red while charging, and will turn to green when fully charged. * This only works with Fenix ARB-L21-5000 battery. Note: Uncover the anti-dust cap and plug the USB Type-C side of the charging cable into the charging port of the lamp. The normal charging time of the included Fenix ARB-L21-5000 is about 4 hours with the lamp being switched off. When charging is complete, replace the anti-dust cap to ensure the waterproof and dustproof ability. Recharge a stored headlamp every four months to maintain optimal Li-ion battery performance. When charging, the Med output level of General mode can be used. The headlamp will not automatically power on after full charging.
Battery Level Indication:
With the lamp switched off, single click the switch to check the battery status, the indicator will last for 3 seconds. Green light on: saturated 100% - 85% Green light flashes: sufficient 85% - 50% Red light on: poor 50% - 25% Red light flashes: critical 25% - 1% Note: This only works with Fenix ARB-L21-5000 battery.
Intelligent Overheat Protection:
The lamp will accumulate a lot of heat when used at relatively high output levels for extended periods. When the lamp reaches a temperature of 65°C or above, the lamp will automatically step down a few lumens to reduce the temperature. When the temperature drops below 65°C, it will then allow the user for the reselection of the modes.
Low-voltage Warning:
When the voltage level drops below the pre-set level, the headlamp is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output mode, the battery level indicator blinks to remind you to timely recharge or replace the battery. Note: This only works with Fenix ARB-L21-5000 battery.
Headband Assembly:
1. The headband is factory assembled by default. 2. Adjust the headband by sliding the buckle to the required length.
Usage and Maintenance:
Disassembling the sealed head can cause damage to the lamp and will void the warranty. Fenix recommends using an excellent quality Fenix battery. If the lamp will not be used for an extended period, remove the battery, or the lamp could be damaged by electrolyte leakage. Loosen the cap or take out the battery to prevent accidental activation during storage or transportation. Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
Problem:
A: The battery needs replacing. Solution: Replace the battery (Ensure battery is inserted according to the manufacturer’s specifications). B: The contact point or contact of the battery or headlamp is dirty. Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact the distributor.
Package & Contents
Retail Packaged Fenix HM70R Headlamp Fenix ARB-L21-5000 Li-ion battery USB Type-C charging cable Spare O-ring User manual Warranty card
For commercial orders and large purchases, contact us at 02921157162, or
